The Practice
Standards · Pricing benchmarks

2026 US Bespoke Millwork & Custom Cabinetry Cost Guide

The figures luxury ateliers keep behind "inquire for pricing", set out as tables. They are the same benchmarks that drive our estimator, so you can check every number it gives you.

Published November 2026 · Benchmarks for US custom and architect-grade commissions

1 · Price per linear foot, by room

Custom Grade, national-average metro, standard ceiling height. Whole-room figures reflect typical sizes for each discipline.

CommissionPer linear footTypical projectPrimary cost drivers
Kitchens & sculleries$1,000 – $2,400$60,000 – $120,000 custom · $150,000 – $300,000+ architect-gradeTall units, appliance panels, island, drawer hardware
Libraries & paneled studies$500 – $1,500+$35,000 – $120,000+Height (8–12 ft), species, paneling, ladder ($1,500 – $4,000+)
Dressing rooms & wardrobes$600 – $2,000+$30,000 – $95,000+Interior veneer, lighting (+$100 – $300/LF), island, vitrines
Wine rooms & cellars$1,000 – $3,000+$40,000 – $150,000+Stable solid timber, cradle count, substrate engineering
Heirloom & boardroom tablesPer piece$12,000 – $45,000+Length, top construction, base, AV integration

2 · Species and material premiums

Relative to paint-grade custom cabinetry (hard maple frames, MDF centre panels, plywood box).

Material / speciesPremium vs. paint gradeTypical custom $/LFWhy it costs what it does
Paint-grade hard maple + MDF Acer saccharumBaseline (0%)$500 – $800High-yield domestic hardwood; MDF prevents paint-line cracking
Quarter-sawn American cherry Prunus serotina+10% to +20%$620 – $920Natural patination; sapwood culling
Rift-cut white oak Quercus alba+20% to +40%$750 – $1,100Milled 30°–60° to the rings; high sawmill waste and hand-sorting
American black walnut Juglans nigra+40% to +60%+$900 – $1,300+ ($1,500+ inset)Low yield of clear wide boards; clear finishes expose defects
Honduran / African mahogany Swietenia · Khaya+35% to +55%$880 – $1,350+Stability in humid rooms; CITES-documented supply
Smoked European oak / figured eucalyptus (FSC)+35% to +60%$900 – $1,400+Fuming or thermal treatment; sequence-matched flitch yield
Pau Ferro Machaerium scleroxylon+55% to +85%$1,150 – $1,800+Dense, oily exotic with rosewood figure, outside the CITES Dalbergia listing

Compare all ten species, including regulated rosewoods, in the Species & CITES Selector.

3 · Construction style uplift

ConstructionUplift
Full overlay, framed0% (baseline)
Frameless (European full-access)+5% to +15%
Inset / in-frame, flush or beaded+15% to +30%+
Inset in major coastal metrosup to +40%

Why inset costs more →

4 · AWI grade uplift

ANSI/AWI 0641 gradeUplift
Custom Grade (contract default)0% (baseline)
Hybrid — Premium on focal elevations≈ +10% to +20%
Premium Grade throughout+25% to +60%
Premium, blueprint-matched exotic veneerup to 2×

How to apply a hybrid grade →

5 · Regional labor multipliers

Skilled trade rates, union and building certificate-of-insurance requirements, and site delivery constraints move the same specification by up to half again.

MarketMultiplier
National / mid-tier US metro1.00×
New York City & Tri-State1.30× – 1.50×
San Francisco Bay Area1.30× – 1.50×
Los Angeles1.30× – 1.50×
Miami1.30× – 1.50×
Boston1.30× – 1.50×

6 · What a millwork contract includes — and excludes

Stone, appliances, rough-in trades and structural work commonly add 30% to 50% on top of the pure millwork contract. Budget for them separately from the start.

Included

  • Design development, field templating and shop drawings
  • Finish and veneer samples for approval
  • All casework, doors, drawers, panels, mouldings and interior fittings
  • Specified hardware: hinges, slides, pulls, ladder rail
  • Finishing in the workshop
  • Delivery, site acclimatization and scribe-fit installation

Excluded

  • Stone, quartzite and metal countertops and backsplashes
  • Appliance suites (Sub-Zero, Wolf, Miele and similar)
  • First-fix plumbing and electrical rough-in
  • Structural framing changes and wall blocking by others
  • Permits, demolition, painting and flooring
  • Wine-room cooling systems, vapor barriers and sealed doors

7 · Realistic US lead times

01Design, templating & shop drawings2 – 6 weeks

Fabrication does not start until final shop drawings are signed.

02Fabrication & finishing8 – 16 weeks

Bespoke inset, sequence-matched veneer or custom colour matching: 12 – 16+ weeks; specialty finishes add 2 – 4.

03Delivery & acclimatization3 – 7 days

Solid timber reaches moisture equilibrium with the house.

04Installation & scribing2 days – 3 weeks

2 – 5 days for a single built-in room; 1 – 3 weeks for a kitchen or whole-house package.

These benchmarks are planning figures for US commissions in 2026. Workshop bids for the same specification commonly vary by 15–20% either way; the brief is what makes bids comparable.