AWI Premium Grade vs. Custom Grade
ANSI/AWI 0641, the American National Standard for architectural wood casework, defines three grades: Economy, Custom and Premium. Luxury residential work is specified at Custom or Premium — and the difference between them is one of the largest single cost decisions in a commission.
Published November 2026
Grade comparison
| Requirement | Custom Grade | Premium Grade |
|---|---|---|
| Role | The industry workhorse and the contract default when no grade is named | The highest grade; reserved for work where quality is the governing criterion |
| Veneer matching between leaves | Book match typical; leaves compatible in colour and grain | Book or slip match with sequence-matched leaves from one flitch |
| Matching across panels | Running or balanced match acceptable | Balanced or centre-balanced; sequence or blueprint matching across elevations where specified |
| Exposed interiors | Compatible material; need not match exterior | Matching species and selection where exposed (open shelving, glass doors) |
| Joint and reveal tolerances | Tight commercial tolerances | The tightest tolerances in the standard |
| Bench labor | Baseline | Roughly 30%–50% more skilled hours |
| Finishing | Standard multi-coat system | Additional steps, sanding between coats, closer colour control |
| Cost | Baseline | +25% to +60%; up to 2× on blueprint-matched exotic veneer |
Summary for planning purposes. The governing text is the current edition of ANSI/AWI 0641 (Architectural Wood Casework), published by the Architectural Woodwork Institute; your specification should cite it by number and grade.
Flitch, sequence and blueprint.
Most of Premium Grade's cost is waste: veneer that is perfectly good but cannot be used because it breaks the sequence.
Veneer is sliced from a log section — a flitch — and the leaves are kept in the order they came off the knife. How those leaves are laid governs what the eye reads:
- Book match
- Alternate leaves flipped like the pages of a book, mirroring the figure at each joint.
- Slip match
- Leaves slid side by side without flipping, repeating the figure — best for straight-grained rift and quarter cuts.
- Sequence match
- Panels across an elevation made from consecutive leaves, so the figure flows door to door in one direction.
- Blueprint match
- Every panel, door and wall section cut to its exact size from a single reserved flitch, so grain runs continuously across a whole room — the most wasteful and most beautiful option.
Sequence and blueprint matching require the workshop to buy and hold an entire flitch large enough for the room before shop drawings are final, and to discard leaves that would break the sequence. That is why an exotic blueprint-matched wall can double the cost of the same wall at Custom Grade.
If the grade is not written, it is Custom.
ANSI/AWI 0641 provides that when a specification references the standard but does not name a grade, Custom Grade applies. Clients who expect matched veneer and matching interiors, and do not write "Premium Grade" against those elevations, have contracted for something else.
The remedy is simple: name the grade per elevation in the material schedule, and confirm it on the shop drawings before signature.

The hybrid specification.
Architects typically specify Custom Grade for 85–90% of a project's casework and reserve Premium Grade for the few elevations people actually stand in front of. Done well, a hybrid saves roughly 20–30% against Premium throughout with no visible loss.
| Room | Premium Grade (focal) | Custom Grade (perimeter) |
|---|---|---|
| Kitchen | Island elevations and end panels; open display shelving; glass-front cabinets | Perimeter runs, pantry interiors, scullery, appliance panels |
| Library | Fireplace wall and main axis paneling | Side walls, lower cabinet interiors, window seats |
| Dressing room | Glass vitrines and the island | Hanging bays behind solid doors, shoe towers |
| Office / boardroom | Reception wall, boardroom feature wall, table | Storage walls, credenza interiors, pantry |
The estimator's Hybrid option applies about +15% — the midpoint of a typical focal-elevation share — instead of the full +40% Premium uplift.